
ASUS TUF Gaming 750W 80 PLUS Bronze ATX Power Supply 135mm Axial-tech Fan
750W · 80+ Bronze
In stock
Written down before you buy
Not covered: breakage, liquid damage, burns from power surges, or opening / tampering with the device.
Warranty & service policySKU: HPT2-1200M-FA
The FSP Hydro PTM PRO 1200W is a 1200W ATX power supply with 80 PLUS Platinum certification, built to deliver steady, efficient power to your PC. If you are comparing the FSP Hydro PTM PRO 1200W price in Iraq, this unit gives you a trusted brand, solid protections and a clear feature set for its class.
The unit measures 180 × 150 × 86 mm and uses a fully modular cable design. Being fully modular, every cable detaches from the unit, so you plug in only the cables your build needs, which keeps the case tidy and improves airflow. Cooling is handled by a 135mm fluid dynamic bearing (FDB) fan with 0 dBA mode (fan stops below 30% load).
With 80 PLUS Platinum efficiency (≥92% at typical load), Cybenetics Platinum certified, less energy is lost as heat, which means lower electricity use, less fan noise and cooler components. The 0 dBA mode keeps the fan completely still at low and medium loads, so the PC stays silent while browsing or working.
It follows the ATX12V v3.1 & EPS12V v2.92 standard and includes a native 12V-2x6 cable, so a modern PCIe 5.0 graphics card such as the RTX 50 series connects with a single cable and no adapters. The ATX 3.x design is built to handle the short power spikes of new GPUs.
Available connectors: 1× ATX 20+4-pin, EPS 4+4-pin CPU, 1× 12V-2x6 for PCIe 5.0 graphics cards, PCIe 6+2-pin, 14× SATA, 5× Molex.
The unit includes OCP, OVP, OPP, SCP, OTP, UVP protections. In simple terms, they shut the power supply down safely if the voltage, current or temperature goes outside safe limits, or if a short circuit happens, protecting your motherboard, graphics card and drives. Japanese main capacitors add stability and a longer service life.
Add up the power draw of the processor and graphics card, leave headroom for the rest of the parts, and make sure the PSU meets or exceeds the wattage your graphics card maker recommends. A power supply runs most efficiently around half of its rated load, which also leaves room for future upgrades.
The FSP Hydro PTM PRO 1200W is a good fit for high-end gaming rigs and workstations with flagship PCIe 5.0 graphics cards such as the RTX 5090.
| Wattage | 1200W |
|---|---|
| 80 PLUS rating | 80+ Platinum |
| Modularity | Fully modular |
| ATX 3.x | Yes |
| 12V-2x6 connector | Yes |
| Form factor | ATX |
| Fan size | 135 mm |
| Zero RPM mode | Yes |
| Color | Black |
| Warranty | 1 yr |
| Length | 180 mm |
| SATA connectors | 14 |
| Brand | FSP |
Yes. It has a native 12V-2x6 connector for PCIe 5.0 cards plus PCIe 6+2-pin connectors for older cards. Always check your card maker's recommended PSU wattage, which should not exceed 1200W.
The 135mm fluid dynamic bearing (FDB) fan stays fully stopped below about 30% load thanks to the 0 dBA mode, then spins up gradually as load rises. This keeps the PC very quiet in daily use.
The box contains the power supply unit, modular cables, user manual. Keep the box and accessories for the warranty period.
When bought from Al Bab Al Aali it comes with a 1-year warranty, cash on delivery and delivery to every governorate in Iraq.
Yes. It uses the standard ATX form factor and is 180mm long, so it fits most cases. The modular cables let you attach only what you need for easier cable management.
Last updated:

750W · 80+ Bronze

1000W · 80+ Gold

750W · 80+ Bronze

850W · 80+ Gold