Al Bab Al Aaly Store
Lexar

Lexar Professional NM1090 PRO 2TB PCIe 5.0 NVMe M.2 SSD with Heatsink

  • Lexar Professional NM1090 PRO 2TB SSD
  • Sequential read up to 14,000 MB/s and write up to 13,000 MB/s
  • PCIe 5.0 x4 interface with NVMe
  • Random performance up to 2100K read and 1800K write IOPS
  • DRAM cache plus dynamic SLC cache
  • 6nm controller with advanced thermal control design
  • 3D TLC NAND and 1400TBW endurance
IQD 550,000
1-year warranty

In stock

1
Order via WhatsApp
  • Delivery: IQD 5,000 — Baghdad 1–2 days · other cities 2–4 days
  • Pay cash on delivery
  • Warranty & service policy

Written down before you buy

1-year warranty

  • Inspect the item in front of the courier before paying — refuse a damaged or wrong item at no cost.
  • Manufacturing defects during the warranty are repaired or replaced free through the dealer (usually 2–4 weeks).
  • A numbered service ticket linked to your invoice, followed up until your item is back with you.

Not covered: breakage, liquid damage, burns from power surges, or opening / tampering with the device.

Warranty & service policy

SKU: LNM109P002T-FA

Description

The Lexar Professional NM1090 PRO 2TB is a fifth-generation PCIe 5.0 x4 NVMe SSD with reads of up to 14,000 MB/s and writes of up to 13,000 MB/s, placing it among the fastest consumer drives available. It is built for professionals, content creators and gamers who want maximum speed when moving large files and loading games, with 2TB of room for big projects and libraries.

Design

The drive uses the M.2 2280 size with a heatsink that helps keep temperatures in check during long transfers, which matters on high-speed Gen5 drives. It is built around a 6nm controller with an advanced thermal control design to reduce the heat it produces.

Performance and key specs

  • Capacity: 2TB
  • Interface: PCIe 5.0 x4, NVMe
  • Form factor: M.2 2280
  • Sequential read: Up to 14,000 MB/s
  • Sequential write: Up to 13,000 MB/s
  • Random read/write: Up to 2100K / 1800K IOPS
  • NAND: 3D TLC
  • Cache: DRAM + dynamic SLC cache
  • Controller: 6nm
  • Endurance: 1400TBW
  • MTBF: 1.5 million hours

Compatibility and installation

The drive installs in an M.2 slot that supports NVMe on a desktop motherboard or laptop and needs no power or data cables. Full speed needs a PCIe 5.0 M.2 slot (found on many recent Intel and AMD boards), and it still works in PCIe 4.0 and 3.0 slots at that generation's speed. Before buying, make sure your M.2 slot supports NVMe and is not SATA-only.

The technology in plain words

NVMe is a protocol designed for flash storage that talks directly over PCIe lanes instead of the older SATA interface, which cuts latency and multiplies speed. TRIM helps keep performance consistent over time, and S.M.A.R.T lets you monitor drive health with software.

Who should buy it?

It suits video editors, designers and anyone working with huge files, as well as gamers building a new PCIe 5.0 system who want the fastest possible loading. 2TB holds a large game library and heavy work projects.

Why buy from Al-Bab Al-Aali?

  • 1-year warranty inside Iraq.
  • Cash on delivery with no prepayment.
  • Delivery to every Iraqi governorate, from Baghdad to Basra, Erbil and Mosul.
  • Genuine product and a support team that helps you pick the right part for your system.

Specifications

TypeNVMe SSD (M.2)
Capacity2TB
InterfacePCIe 5.0 NVMe
Read speed14000 MB/s
Write speed13000 MB/s
NANDTLC
DRAM cacheYes
HeatsinkYes
Endurance (TBW)1400 TB
Warranty1 yr
Form factorM.2 2280
PCIe generationGen 5
BrandLexar

What's in the box

  • SSD with heatsink
  • User manual

Product FAQ

Do I need a PCIe 5.0 motherboard for the NM1090 PRO?

To reach the full 14,000 MB/s, yes, you need a PCIe 5.0 M.2 slot. The drive still works in PCIe 4.0 and 3.0 slots, but at that generation's speed.

Does the NM1090 PRO get hot under long use?

Gen5 drives run warmer than earlier generations, so this version comes with a heatsink and uses a 6nm controller with an advanced thermal control design. We recommend installing it in a well-ventilated case.

What is in the box of the Lexar NM1090 PRO 2TB?

The box contains: ssd with heatsink, user manual. No extra cables are included because the drive does not need them in most cases.

Is there a warranty on the Lexar NM1090 PRO 2TB in Iraq?

Yes, the drive comes from Al-Bab Al-Aali with a full 1-year warranty inside Iraq. If a manufacturing defect appears during that period we handle inspection and replacement under the warranty terms.

How do I move my operating system to the Lexar NM1090 PRO 2TB?

You can install Windows fresh on the drive for the cleanest result, or use cloning software to copy your system and files from the old drive. After installation, set the new drive as the boot device in the BIOS.

Last updated:

Similar products